Programming RMGs with 2.4g Radios

Radios, Servos, Winches, Batteries
All things that can make sparks

Moderators: Capt. Flak, bigfoot55, Chuck Luscomb

Programming RMGs with 2.4g Radios

Postby Frandito » Mon May 25, 2009 7:02 am

What is the trick to get the RMGs to respond to the 2.4g radios given the delay with linking up.
I have a Futaba T6EX

"I try to think, but nothing happens"

frandito
User avatar
Frandito
 
Posts: 81
Joined: Tue Feb 17, 2004 2:34 pm
Location:

Postby Merv49 » Mon May 25, 2009 3:31 pm

I have the 6EX also and had no problems at all programming the RMG. I did make the disconnect switch so I didn't have to keep turning the reciever on and off. Maybe that's what you're missing to make things easier. I got a cheap toggle switch from Radio Shack and wired it into a 6" extension and that's all you need. My RMG is the D model which is different from the E model so you'll have to check the instructions to see what will work for you.


<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Frandito</i>

What is the trick to get the RMGs to respond to the 2.4g radios given the delay with linking up.
I have a Futaba T6EX

"I try to think, but nothing happens"

frandito
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
Merv49
 
Posts: 34
Joined: Thu Sep 11, 2008 6:40 pm
Location:

Postby greerdr » Mon May 25, 2009 8:00 pm

The switch is the essential part!

R.C.Greer
greerdr
 
Posts: 614
Joined: Mon Sep 15, 2003 5:39 pm

Postby geeks2you » Tue May 26, 2009 8:28 am

There is a good writeup on the RMG page

http://www.users.bigpond.com/rmgsw/SpektrumCompatability.htm

Eric Olson
Atlanta Model Yacht Club
AtlMYC.org
geeks2you
 
Posts: 60
Joined: Sun Apr 19, 2009 1:37 pm

Postby Frandito » Tue May 26, 2009 7:29 pm

Thanks guys. I do have the older type winch.
That will do the trick

frandito
User avatar
Frandito
 
Posts: 81
Joined: Tue Feb 17, 2004 2:34 pm
Location:


Return to Electronics

Who is online

Users browsing this forum: No registered users and 0 guests