Radios, Servos, Winches, Batteries
All things that can make sparks
Moderators: Capt. Flak, bigfoot55, Chuck Luscomb
by charles matthews » Sun Mar 19, 2006 6:05 pm
Is anyone using this radio? I am thinking this would be a good tx for an ec-12. what servos are best to use for rudder and jib trim?
new to the sport, Chas
-
charles matthews
-
- Posts: 1
- Joined: Thu Mar 16, 2006 12:26 pm
- Location:
-
by greerdr » Tue Mar 21, 2006 11:23 pm
JR only shows air (72 mgH) recievers/xmtrs on the JR site;you want 75 for surface use.That is a LOT of radio. For $400.00 you could get 2 DX6 spectrum radios and recievers.I use a 3004(42 oz/in torque) for jib trim and a cirrus CS80 (129 oz/in)for rudder.The rudder torque is probably overkill but sometimes needed.
R.C.Greer
-
greerdr
-
- Posts: 670
- Joined: Mon Sep 15, 2003 5:39 pm
by s vernon » Wed Mar 22, 2006 7:45 am
Chas,
The survey should give you some idea of what people use for sevos. Also look at the building site ec12.info. I personally am confused about digital, coreless, high amperage draw... I just go with the cheap copies of the HS-645 that being the Tower Hobbies TS70 for jib trim and rudder. Also a good idea to use the alternate wiring on the RMG; puts 6v versus about 5v coming out of the RMG (6v meaning pretty much full battery power) to the servos.
http://www.proefrock.net/EC12Web/Bldg_I ... gIdeas.htm
Scott
-
![User avatar](./download/file.php?avatar=22_1389635627.jpg)
s vernon
-
- Posts: 471
- Joined: Mon Sep 15, 2003 9:18 pm
- Location:
-
Return to Electronics
Who is online
Users browsing this forum: No registered users and 20 guests