Page 1 of 1

JR FM radio/crystal problem

PostPosted: Thu Mar 24, 2005 12:29 pm
by The OZ
New guy sailing EC12. My boat, which is a very beautiful boat, has a JR PROPO FM radio -F400EX. My problem is when I ordered a back up channel #87 it would not work. Took to hobby shop were purchased item, they tried, no luck, tired another new 87 crystal still would not work. They called a 'tech guy' who told them this type radio would only work on that one crystal (79) becasue it was not designed for boats or other crystals. Find this hard to beleive. Any suggestions? Boat sails wonderful on 79 but need the option of using other channels when needed at regattas. Thanks.

PostPosted: Thu Mar 24, 2005 2:23 pm
by MichaelJ2K
Oz,
Usually retuning would be required. The "tech guy" you talked to was probably the janitor....[:0], because he's totally wrong. BTW, are you changing the transmitter module or just the crystal? You can change a module but by FCC rule you must be a licensed technician to alter a transmitter RF output, i.e., installing a crystal and retuning. You can tune the receiver yourself. Best bet is to have a backup matched module and receiver you can change at a regatta. Futaba, JR and Hitec produce radios on "low" and "high" band. That splits the channels into two groups, lowering the cost of producing receivers. In essence, Joe is right, it should have worked.