size of hex wrench for gooseneck

All things above deck

Moderators: Capt. Flak, bigfoot55, Chuck Luscomb

size of hex wrench for gooseneck

Postby s vernon » Fri Jul 29, 2011 7:02 pm

Does anyone know what the size is for this tiny hex wrench? Thanks.

Scott
User avatar
s vernon
 
Posts: 471
Joined: Mon Sep 15, 2003 9:18 pm
Location:

Postby RMDJBD » Sat Jul 30, 2011 12:35 am

Scott

If it is for a 2-56 set screw, it is a .034 allen wrench.

They are hard to find, I have them.

Bob Dudinsky
R.M.D.MARINE
RMDJBD
 
Posts: 87
Joined: Tue Oct 07, 2003 10:58 am
Location:

Re: size of hex wrench for gooseneck

Postby Rick N » Mon Dec 03, 2012 2:02 pm

Scott,
Some of us have found that tossing the #2-56 set screws and replacing with cut-off round head philips screws solves the problem. The hex head set screws are nice and small, but adding the weight of 4 philips heads won't be noticed on the course, and you will never round out another hex socket.
Rick Noddin - AMYA 1645
Rick N
 
Posts: 6
Joined: Sat Feb 04, 2012 12:19 am

Re: size of hex wrench for gooseneck

Postby Rick West » Mon Dec 03, 2012 10:05 pm

I would agree and that would be a 5-64" round head from the bow side of the mast and to match the rest of the rig fasteners here at the Delta shop.
...94 [8D]
Pacifica By The Sea
User avatar
Rick West
 
Posts: 3204
Joined: Sun Sep 14, 2003 8:53 pm
Location: San Francisco, CA

Re: size of hex wrench for gooseneck

Postby hedderick » Mon Dec 03, 2012 11:28 pm

Another approach....with the fitting in place....
Remove the existing screw with the "tiny" hex wrench.
Take a 1/16" drill bit and put it in the hole where the 2-56 screw was.
Drill into the mast, but not all the way through the front. Remove the drill bit.
Screw a 2-56 tap into the hole where the screw was and tap right into the mast. Don't go out the front.
Now take a new 1/2 inch long 2-56 hex head screw and screw it back into the fitting and continue into the mast.
The screw head will show, but not interfere with anything.
Solid..nothing will move.
Richard Hedderick 38
hedderick
 
Posts: 107
Joined: Sat Jan 06, 2007 12:47 am
Location:


Return to Sails & Rigs

Who is online

Users browsing this forum: No registered users and 1 guest

cron