PeKaBe hooks - not suitable for EC-12s

All things above deck

Moderators: Capt. Flak, bigfoot55, Chuck Luscomb

PeKaBe hooks - not suitable for EC-12s

Postby rs vernon » Sun Jun 19, 2016 8:44 pm

I am interested in other people's opinion on this.

It is always good to find out what failed when a boat loses its rig.

Today we had wonderful B rig wind for our fleet race. Two boats came together going upwind and one of boats lost its rig. The skipper said that the PeKaBe hook on the swivel/string at the jib rack straightened out causing the rig to come down. To identify it, that hook is the one that has a little reverse curve at the tip of the open end.

Those hooks are soft steel. The only place they should be used on an EC-12 is on the sheet elastic where they will never see a shock load. Every other place on the EC-12 - backstay, jib stay, sheets lines... Those hooks are not strong enough to handle a good sized shock load.

Good strong hard (stainless) steel hooks, but not the standard PeKaBe.

Scott
User avatar
rs vernon
 
Posts: 108
Joined: Mon Jul 21, 2014 6:40 pm

Re: PeKaBe hooks - not suitable for EC-12s

Postby Ragresen » Mon Jun 20, 2016 7:42 pm

I hope the replacement Sails ECT hook I gave to him got him back out on the water and remained a good change the day and further out.
John Pardus
Ragresen
 
Posts: 4
Joined: Thu Feb 04, 2016 11:33 am

Re: PeKaBe hooks - not suitable for EC-12s

Postby steve h » Tue Jun 21, 2016 10:47 am

I guess the questions become....are the pekabe hooks suited for "normal" sailing conditions, even in B rig? You mentioned contact. If the contact caused the hook to bend and release the rig, how different would the damage have been if it had a heavier duty clip?

If the hook failed under "normal" b-rig conditions, I'd agree that a replacement should be looked at.

Personally, I'd probably want the pekabe hook to fail, and be an easy repair/replace, than to suffer more severe damage to the hull, the deck, or the rig that would end your day or event.
#1988 and #1858...aka Frank's boat
steve h
 
Posts: 103
Joined: Tue May 10, 2011 1:12 am
Location: Greensboro, NC


Return to Sails & Rigs

Who is online

Users browsing this forum: No registered users and 2 guests

cron