by Frank Angel » Thu Mar 24, 2005 3:18 pm
Hi Mike,
Your question is covered in the Class Rules: See 3.4
3.0 HULL
3.1 Hulls shall be obtained only from authorized manufacturers.
3.2 The overall length of the hull shall be established by the daughter plug.
3.3 Alteration to the manufactured hull by sawing, cutting, or adding any material to the exterior of the hull that would change the profile, contours or shape in any way is prohibited.
3<font color="red">.4 Notwithstanding Section 3.3, the aft edges of the keel may be faired into the rudder.</font id="red">
3.5 All registered yachts from previously approved manufacturers that met the Class Specifications on the date of their manufacture will be considered legal.
Regards,
Frank Angel